OldTools Archive

Recent Bios FAQ

277070 Dennis Heyza <michigaloot@c...> 2023‑03‑04 Re: making scrollwork... how to smooth?
Narrow strips was what I alluded to in my reply. Just cut a strip (found it
helps if you cut 1" and fold it over to 1/2"). If you cut it long enough (say
5-6") you can easily pull it taught above/below the scrollwork and sand -
sometimes up/down, sometimes side to side. You can easily get this is pretty
tight spots.

Dennis

-----Original Message-----
From: oldtools@g...  On Behalf Of Bridger Berdel
Sent: Friday, March 3, 2023 9:41 PM
To: tonyseo@p...
Cc: James DuPrie ; Tools Old 
Subject: Re: [oldtools] making scrollwork... how to smooth?

Narrow strips of abrasives sounds like something that could be mounted into a
fret saw....

Recent Bios FAQ