OldTools Archive

Recent Bios FAQ

75931 Steve Gass <sgass@g...> 2000‑03‑07 hello . . .
Hello all,

I subscribed to this list just last week - just in time for the flea
market, as it turns out. I'm not very proficient at introducing myself
(I'm the guy you see sitting quietly in the corner at parties), but
Keith says that if I post a bio he'll sell me a couple of planes. So,
under duress, here's some info about me:

I'm currently a web weenie; my wife and I run a small business
designing and hosting websites. I've done a few recognizable
woodworking projects, mostly for other people, but most of my work has
been and will continue to be in the completion of my house and,
hopefully, much of the furniture therein. I'm getting a little worried
about running out of projects to build, though, since I'm almost done
with the house - all I have left to do are my workbench, 3 staircases,
2 office areas, a sort of 40' long wainscot/window seat/cabinet thing,
a half dozen doors, 3 bathrooms and, oh yeah, a kitchen (for some
reason swmbo (look at that - I'm learning stuff already) is getting a
little anxious to have some of these things (I don't know why, since we
already have a grill and a flush toilet - what more do we need?)). I
guess once that's done I'll probably take on the dining room table and
an armoire or two, and I'd kind of like to build a (classical and/or
steel string acoustic) guitar or two at some point.

I've actually done very little woodworking at all over the past 6 or 7
years (sad, ain't it?), having been too busy with other things. In my
previous efforts I mostly used the nasty, screaming, tailed things
that inhabit my basement, for the sake of expediency. I've always had
neanderthalic urges, though, and can no longer resist them. Nowadays,
the thought of all that noise and dust and whirling carbide makes me
cringe, and besides, the memory of the first time I used a reasonably
sharp plane and shellac on an otherwise plain piece of maple is etched
quite firmly in my mind . . .

So here I am. That's me, currently, in a nutshell. Now will you sell me
those planes, Keith?   :)

Oh, btw, my little brother might also be floating around in here
somewhere, although I think boatbuilding school (he sucks) might be
keeping him a little too busy to participate actively.

Steve Gass, galoot wannabe
Reinholds, PA    (I can hear MD calling . . .)


75974 Phil and Debbie Koontz <pdknz@j...> 2000‑03‑08 Re: hello . . .
Hi Steve--

That was a nice drive by gloat about getting short on your project list
.  I think you will find that it actually grows with time...  I
haven't seen a project yet that didn't start about three others.  And
most of them never get finished.

And, BTW, I wish you east coasters would quit holding all the tool sales
way the hell out there on the edge of nowhere.

Phil Koontz
On the verge of finishing a project.  In Kansas.

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.


75983 Steve Gass <sgass@g...> 2000‑03‑08 Re: hello . . .
On Tue, 07 Mar 2000, Phil and Debbie Koontz wrote:

> That was a nice drive by gloat about getting short on your project list

Oh, was that a gloat? A drive by, no less. My first - I'm so proud - but
dang it, I forgot the "neener neener neener".

> I haven't seen a project yet that didn't start about three others.

The problem I always seem to have is that, every time I try to start a
project, I realize that I have to get three others done first! Like the
wainscot/window seat/cabinet thing that I should be building - I just
picked up 150 ft. of poplar that I have to plane, bead, etc., but I
don't have a reasonable workbench on which to do that . . . and so it
goes . . .

> most of them never get finished.

See above :)

> And, BTW, I wish you east coasters would quit holding all the tool sales
> way the hell out there on the edge of nowhere.

neener neener neener



Recent Bios FAQ